Korneff Audio PSC Pawn Shop Comp 2.1 -
FET Compressor/Limiter Plugin
Gritty. Punchy. Smooth. Warm. All that. And more!
The Pawn Shop Comp 2.0 is a professional tool that will make a huge difference in the quality and impact of your mixes. It sounds great on any sound source and in virtually any application.
More than a compressor, the Pawn Shop Comp also has a fully adjustable tube preamp, a two-band equalizer, and swappable components that give you unprecedented control of every parameter of the plugin.
"Pawn Shop Comp is full of analog colour, it has been incredible for so many instruments, especially drums. With Dan putting his amazing electronics knowledge into the tweakable elements of the plugin, it has made this such a versatile compressor for me."
- Romesh Dodangoda
(Motorhead, Bring Me The Horizon, Funeral For A Friend)
Get punch and snap out of individual drums or the entire drum bus. Built-in low-frequency EQ centered at 63Hz, perfect for enhancing the chance of a kick drum. And you can dial in a bit of saturation to mimic the sound of classic FET limiters like the 1176.
Built for bass sounds. Dial-in attack to punch the bass through the mix. Set release to control the sustain and resonance. Some low-end equalization to enhance the bottom end, and add some tube-style saturation for additional growl.
Killer on electric guitars. Precise control over note articulation and sustain. Adjust the midrange equalization for presence in the mix. Swap in ECC-83 tubes and get vintage amp overdrive and distortion... from a compressor!
The PSC is a vocal channel strip, with almost everything you need to get kick-ass vocals. Get smooth tube Opto compression, or crush it for color and character. Swap out transformers for a tighter or darker response. Add warmth with the preamp, or saturation and drive.
Add color, character, and crunch lead lines, and warmth and warmth and harmonic structure pads. The wide adjustability of the PSC makes it a natural for use with analog or sampled pianos.
Bus compression with the Pawn Shop Comp... yes, it can do this, too. Give your mix or instrument cluster definition and “glue.” Control the amount of effect with the Wet/Dry control for easy parallel processing. Punch up the top and bottom with the PSC’s inductor based EQ.
Too often, the accordion is overlooked in modern recording... kinda like the cowbell. The Pawn Shop Comp’s preset library is full of places to start when you don’t quite know what you’re dealing with, but know it needs something.
"It's hard to come by plugins, especially plugin compressors, that do something unique that hasn’t been done before. I don't know how he has done it, but Dan's plugins give me a totally different flavor than anything else out there. They sound great, are super easy and fun to use, and give you that "wow" factor that can turn a dull sound into something super exciting the second you instantiate them. I am looking forward to seeing what Korneff Audio has in store for the future!"
- Zakk Cervini
(Yungblud, Blink 182, All Time Low, Poppy)
The Compressor: A Modern Classic
A unique hybrid tube/FET circuit lets the Pawn Shop Comp handle virtually any compression task you throw at it. Complete controls for all compressor parameters let you tailor the response from smooth to punchy to total crush.
- THRESHOLD: 0dB to -100dB
- RATIO: 2:1 to 50:1
- ATTACK: .2ms to 200ms
- RELEASE: 10ms to 1.2s
- AUTO MAKE-UP GAIN: interactive with Threshold and Ratio
- MANUAL MAKE-UP GAIN: +/-18dB
- PWR ON/OFF: switch the compressor off and use the PSC’s great sounding preamp and equalizer.
A Tube Preamp
Use the Pawn Shop Comp’s tube preamp to add saturation and the warm harmonic distortion that is the mojo of tubes. But push GAIN even further to add overdrive and distortion, and adjust the BIAS for total shred. The PSC preamp can add character to vocals, hype to guitars and bass, and incredible color to room mics and the drum bus.
Swap Tubes and Transformers
Swap between three different sets of tubes and three different transformers to adjust the response of the Pawn Shop Comp from timid to aggressive. Combined with the preamp Gain and Bias, tubes and transformers let the PSC sound like a classic tube limiter from the early '60s, to modern, high-end bespoke compressors, and all shades in-between.
2 Bands of EQ
The EQ can be used to compensate for the loss of lows and presence that happens at high compression settings. But it can even further. The PSC 2.0 now has with two selectable center frequencies per band for more control and creativity. The WEIGHT control can be set for extreme lows (think kick drums) or slightly higher to give a signal warmth. The FOCUS control is centered in the midrange and adjustments in this band can add presence and width to a track. With +/- 8dB of gain, and wide, gentle peaking curves, use the eq to beautifully sculpt a track or an entire mix.
Tweakable like no other
Want to change the compression curves of the PSC? Swap in different FETs. Want to get a vintage sound? Swap in Carbon resistors. Need something bright and modern? Switch over to Metal film resistors. Looking to experiment? Crank up the OPERATING LEVEL control and emulate what happens when you blow up gear in the studio - but without the smoke, fire, repair bills, or chance of electrocution. And if you go too far, you can back it all down using the WET/DRY control, or the INPUT and OUTPUT trims. Set the OVERSAMPLING rate to better manage your CPU usage. Browse the PRESET LIBRARY. Adjust the size of the GUI to fit your monitors and studio set-up.
This ain’t no one knob plugin.
- MacOS 10.7 Lion or higher, 10.14 Mojave or higher recommended
- Windows 7 and above
- 1GHz Intel Dual Core CPU or better / AMD equivalent
- 4GB RAM or more
- 1024x768 screen resolution or higher
- Licensing: iLok Machine, iLok Dongle, or iLok Cloud
- 64 bit DAW support only
Supported Plugin Formats
- Intel Mac 64bit: VST3, AU, AAX
- Windows 64bit: VST3, AAX
Products with education pricing are for students & teachers only. To prove your education status we require that you upload proof in the form of an image/PDF.
Types of proofStudent
Student ID Card, Letter of enrollment, or similarTeacher/Lecturer
Teacher ID Card, Lecturer ID Card, Payslip, Letter from the school/college
Education proof is submitted to the manufacturer and is accepted at their discretion.
Digital Download Info
Digital Products are delivered electronically via Email. No physical product will be shipped to you!
In most cases, the product you purchase from us is a serial number/license code/activation code to register the product with the manufacturer and download directly from them. This ensures you receive the latest version of products, and the best support when neccessary.
The email you receive from us after purchase will contain the license code and a link to our Install Instructions page. You can visit that page by clicking here: Install Instructions.
This crossgrade is for owners of a competing DAW. To prove your DAW ownership, we require that you upload proof in the form of an image/PDF.
Types of proof
A copy of your purchase receipt for the original license or the most recent update/upgrade
A screenshot of your product registration
A photo of your package (either CD/DVD or printed manual), with the unique serial number included in the photo.